Do it yourself
Frequently asked questions about cars and motorcycles
To replace the brake pads on a Moto Guzzi V7 Classic, you must perform the same operation on both the front and rear wheels: it will be necessary to loosen the screws that secure the brake caliper to the corresponding disc, so that it is completely detached. The pads inside can then be removed and replaced with new spare parts; after replacement, reposition the pads in the caliper, placing it back on the disc and securing it properly, ensuring everything functions correctly.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

V7 Classic To replace the brake pads on the Moto Guzzi V7, first position the bike on a stable stand on a flat surface. Once done, start by removing the old bra…
V7 Classic To replace the front brake pads on a Moto Guzzi V7, use pliers to detach the retaining rings from the pins located at the top and bottom of the brake…
V7 Classic To replace the spark plug on the Moto Guzzi V7 Classic, you need to extract the parts from their housing: these will be located on the right side of …

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos