Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Pressure Switch on the Moto Guzzi Eldorado

Model: Moto Guzzi Eldorado

Video tutorial

In this brief guide, we will see the instructions that will allow you to remove and replace the engine oil pressure switch on the Moto Guzzi Eldorado. First, place the motorcycle on the stand and start unscrewing the pressure sensor located at the front of the engine next to the exhaust manifold using a socket or star wrench; disconnect its electrical connector, as shown in the video.

At this point, install the new original oil pressure switch, securing it and connecting it, following the video tutorial to the end!


Posted on 5 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Moto Guzzi Eldorado
How to Change the Engine Oil of the Moto Guzzi Eldorado
Eldorado Follow the steps below to perform the routine maintenance oil change on the Moto Guzzi Eldorado. First, place the motorcycle on its stand and remove …
How do you replace the motor oil of the Moto Guzzi Eldorado?
How do you replace the motor oil of the Moto Guzzi Eldorado?
Eldorado In order to replace the motor oil of the Moto Guzzi Eldorado, you need to loosen the drain plug of the oil pan, which will be located in the central …
How to change the motor oil of a Moto Guzzi Eldorado?
How to change the motor oil of a Moto Guzzi Eldorado?
Eldorado To change the motor oil of a Moto Guzzi Eldorado, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine an…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos