Do it yourself
Frequently asked questions about cars and motorcycles
In this video, see how to remove and replace the front brake pads on a Moto Guzzi Breva 750 in simple steps. First, position your motorcycle on the stand and remove the two pins found on the brake caliper using pliers; then, once the pins are removed, you can extract the old pads from inside, as shown in the video. At this point, clean the inside of the caliper from carbon residues and fit the new brake pads; proceed with replacing the pads on the other caliper!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Breva 750 Today we will see, in this video tutorial, the steps to remove and replace the rear brake pads on a Moto Guzzi Breva 750. First, remove the retaining…
Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
Breva 750 To replace the air filter on a Moto Guzzi Breva 750, open the box to fully extract the filter inside. To open the box, loosen the screws located on t…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos