Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will see, in this video tutorial, the steps to remove and replace the rear brake pads on a Moto Guzzi Breva 750. First, remove the retaining pin of the pads by tapping it out from one side and then pulling it out from the other, as shown in the video; next, unscrew the bolts of the brake caliper and remove the caliper itself, extracting the old pads. At this point, replace them with new ones of the correct type and good quality, and reassemble everything by applying the reverse procedure of disassembly!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of a Moto Guzzi Breva 750
How to Remove the Front Wheel of a Moto Guzzi Breva 750
Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
Replacing Front Brake Pads on Moto Guzzi Breva 750
Replacing Front Brake Pads on Moto Guzzi Breva 750
Breva 750 In this video, see how to remove and replace the front brake pads on a Moto Guzzi Breva 750 in simple steps. First, position your motorcycle on the s…
How to Replace the Air Filter on a Moto Guzzi Breva 750?
How to Replace the Air Filter on a Moto Guzzi Breva 750?
Breva 750 To replace the air filter on a Moto Guzzi Breva 750, open the box to fully extract the filter inside. To open the box, loosen the screws located on t…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos