Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Wheel of a Moto Guzzi Breva 750

Model: Moto Guzzi Breva 750
Part: Wheel

This video is currently unavailable

Today, you will learn how to remove the rear wheel of a Moto Guzzi Breva 750. First, loosen the central wheel bolt using a socket spanner: then, use a hammer to remove the central pin, pushing it out the other side. Next, unscrew the fixing screw of the exhaust silencer and remove it; unscrew the bolt located at the back and finally extract the rear wheel, as shown in the video.

Now, simply refit it by reversing the procedure and following the video to the end!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of a Moto Guzzi Breva 750
Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
Changing the Gear Oil on a Moto Guzzi Breva 750
Breva 750 In this video tutorial, you will learn how to change the gear oil on a Moto Guzzi Breva 750. First, lift your motorcycle and position it on the centr…
Replacing Front Brake Pads on Moto Guzzi Breva 750
Breva 750 In this video, see how to remove and replace the front brake pads on a Moto Guzzi Breva 750 in simple steps. First, position your motorcycle on the s…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos