Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to change the gear oil on a Moto Guzzi Breva 750. First, lift your motorcycle and position it on the centre stand; then, unscrew the oil drain bolt located at the bottom right, near the rear wheel. After allowing the oil to drain into a container for about ten minutes, close the bolt and open the upper fill cap; pour in the correct type of new gear oil, inserting approximately one litre of oil until it overflows from the fill hole, as shown in the video.

Updated on 23 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Front Wheel of a Moto Guzzi Breva 750
How to Remove the Front Wheel of a Moto Guzzi Breva 750
Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
How to Adjust the Valves on the Moto Guzzi Breva 750?
How to Adjust the Valves on the Moto Guzzi Breva 750?
Breva 750 To adjust the valves on the Moto Guzzi Breva 750, you need to unscrew the bolts securing the cover located on the left side of the bike, just below t…
How to Replace the Air Filter on a Moto Guzzi Breva 750?
How to Replace the Air Filter on a Moto Guzzi Breva 750?
Breva 750 To replace the air filter on a Moto Guzzi Breva 750, open the box to fully extract the filter inside. To open the box, loosen the screws located on t…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos