Do it yourself
Frequently asked questions about cars and motorcycles
To adjust the valves on the Moto Guzzi Breva 750, you need to unscrew the bolts securing the cover located on the left side of the bike, just below the fuel tank. Once this cover is removed, you will have access to the underlying valves, which need to be adjusted using a socket wrench; additionally, their adjustment can be made using a feeler gauge, which will allow you to tighten or loosen the valves according to the values indicated in the owner's manual. When the adjustment is complete, you can close the cover.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
Breva 750 In this video, we will see the steps to remove and replace the speed sensor on a Moto Guzzi Breva 750. First, place your motorcycle on the centre sta…
Breva 750 Today we will see, in this video tutorial, the steps to remove and replace the rear brake pads on a Moto Guzzi Breva 750. First, remove the retaining…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos