Do it yourself
Frequently asked questions about cars and motorcycles
Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then move the caliper aside. Next, loosen the screws that hold the fork around the axle. Once done, unscrew and remove the nut that secures the front wheel axle, then slide out and remove the axle itself. After completing this step, you will have freed the front wheel of your Moto Guzzi Breva 750, which you can now remove, completing the disassembly.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Breva 750 Today, you will learn how to remove the rear wheel of a Moto Guzzi Breva 750. First, loosen the central wheel bolt using a socket spanner: then, use …
Breva 750 To replace the air filter on a Moto Guzzi Breva 750, open the box to fully extract the filter inside. To open the box, loosen the screws located on t…
Breva 750 In this video, we will see the steps to remove and replace the speed sensor on a Moto Guzzi Breva 750. First, place your motorcycle on the centre sta…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos