Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we will see the steps to remove and replace the speed sensor on a Moto Guzzi Breva 750. First, place your motorcycle on the centre stand and remove the left exhaust silencer by unscrewing the mounting bracket screw; then unscrew the wheel axle bolt using a socket wrench. At this point, unscrew the opposite hex screws and remove the wheel pin; now you can disconnect the speed sensor along with its cable (you need to pull it out from under the seat). Reassemble everything, following the video until the end!

Updated on 8 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Front Wheel of a Moto Guzzi Breva 750
How to Remove the Front Wheel of a Moto Guzzi Breva 750
Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
How to Adjust the Valves on the Moto Guzzi Breva 750?
How to Adjust the Valves on the Moto Guzzi Breva 750?
Breva 750 To adjust the valves on the Moto Guzzi Breva 750, you need to unscrew the bolts securing the cover located on the left side of the bike, just below t…
How to Replace the Air Filter on a Moto Guzzi Breva 750?
How to Replace the Air Filter on a Moto Guzzi Breva 750?
Breva 750 To replace the air filter on a Moto Guzzi Breva 750, open the box to fully extract the filter inside. To open the box, loosen the screws located on t…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos