Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, we will see the instructions that will allow us to dismantle and replace the ignition relay on a Moto Guzzi Breva. First, place your motorcycle on the centre stand and begin by removing the rider's seat; underneath, you will find the various relays and fuses, disconnecting the electrical connector and removing the relevant relay, as shown in the video. At this point, install the new ignition relay, ensuring it is the correct type and has the same connector; once installed, check the operation of the ignition system!

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of a Moto Guzzi Breva 750
How to Remove the Front Wheel of a Moto Guzzi Breva 750
Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
Replacing Front Brake Pads on Moto Guzzi Breva 750
Replacing Front Brake Pads on Moto Guzzi Breva 750
Breva 750 In this video, see how to remove and replace the front brake pads on a Moto Guzzi Breva 750 in simple steps. First, position your motorcycle on the s…
How to Replace the Air Filter on a Moto Guzzi Breva 750?
How to Replace the Air Filter on a Moto Guzzi Breva 750?
Breva 750 To replace the air filter on a Moto Guzzi Breva 750, open the box to fully extract the filter inside. To open the box, loosen the screws located on t…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos