Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Remove the two bolts that secure the brake caliper, as clearly seen in the first part of the video. Now, pull the caliper off the brake disc and then remove the pins that hold the pads in place. The pins are meant to secure the pads, so once the pins are removed, you can also take out the pads. If the new pads are difficult to fit, as they are obviously thicker than the removed ones, slightly widen the slots with a flat screwdriver, then proceed in reverse for reassembly until you have refitted the caliper onto the brake disc.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the oil in the drive shaft of a Moto Guzzi V7?
How to change the oil in the drive shaft of a Moto Guzzi V7?
V7 Custom To change the oil in the drive shaft of a Moto Guzzi V7, start by placing the motorcycle on a stable stand to keep it perfectly balanced. Ensure that…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos