Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change on Moto Guzzi V85tt

Model: Moto Guzzi V85tt
Part: Checks and maintenance

Video tutorial

Use a 10W-40 four-stroke engine oil. Warm up the engine for a few minutes before performing the service to aid in the subsequent oil drainage. Remove the four 10 mm bolts securing the lower engine cover.

Now remove the bracket that prevents access to the 17 mm drain bolt. At this point, you can remove the drain bolt and collect the used lubricant in a container.

While this is happening, unscrew and replace the oil filter. Tighten the drain hole and refit the lower covers, then fill the same amount through the upper fill hole as shown in the video.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Moto Guzzi V85TT?
How to Change the Engine Oil on a Moto Guzzi V85TT?
V85tt You can perform the engine oil change on the Moto Guzzi V85TT by loosening the drain plug located at the central lower part of the bike: once this pl…
Engine Oil and Oil Filter Replacement for the Moto Guzzi V85TT
Engine Oil and Oil Filter Replacement for the Moto Guzzi V85TT
V85tt In this short video, we will discover the steps to perform routine maintenance on the Moto Guzzi V85TT by replacing the engine oil and oil filter. Fi…
How to replace the engine oil and oil filter on the Moto Guzzi V85TT
How to replace the engine oil and oil filter on the Moto Guzzi V85TT
V85tt In this brief guide, you will see the steps to perform the routine maintenance service by replacing the engine oil and oil filter on the Moto Guzzi V…

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos