Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial video, you will learn how to stop the creaking of the suspension on the Moto Guzzi V85TT, following the instructions below. First, position the central stand on your bike and start by removing the rear suspension, unscrewing the fastening screws found at the top and bottom; then, remove and space the suspension seats with washers, lubricating and greasing everything. At this point, you can reassemble the suspension, checking that the creaks have disappeared, following the video to the end!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear suspension of the Moto Guzzi V85TT
How to replace the rear suspension of the Moto Guzzi V85TT
V85tt Here are the instructions for removing and replacing the rear suspension of the Moto Guzzi V85TT, following these simple steps. First, place the moto…
How to adjust the valve clearance on the Moto Guzzi V85TT
How to adjust the valve clearance on the Moto Guzzi V85TT
V85tt Valve adjustment is very important to ensure the proper functioning of the engine; by following the appropriate instructions, it is indeed possible t…
How to Change the Engine Oil on a Moto Guzzi V85TT?
How to Change the Engine Oil on a Moto Guzzi V85TT?
V85tt To change the engine oil on your Moto Guzzi V85TT, first ensure the engine is cold. Position the bike on a flat, stable surface. Remove the oil cap o…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos