Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let's see in this short guide how to quickly adjust the inclination of the front fairing of the Moto Guzzi V85TT, in simple steps. First you need to purchase the quick adjustment kit; then unscrew the two fixing screws of the front fairing, as shown in the video. At this point we install the screws that can be adjusted by hand, then set the angle of the windshield and then tighten the two screws by hand. In this way it will be possible to adjust the inclination of the windshield of our bike whenever we wish!

Posted on 28 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you install the windshield of the Moto Guzzi V85TT?
How do you install the windshield of the Moto Guzzi V85TT?
V85tt In order to install the windshield of the Moto Guzzi V85TT, you need to position it in the front part of the motorcycle, immediately above the front …
How to adjust the valve clearance on the Moto Guzzi V85TT
How to adjust the valve clearance on the Moto Guzzi V85TT
V85tt Valve adjustment is very important to ensure the proper functioning of the engine; by following the appropriate instructions, it is indeed possible t…
How do you adjust the clutch of the Moto Guzzi V85TT?
How do you adjust the clutch of the Moto Guzzi V85TT?
V85tt To adjust the clutch of the Moto Guzzi V85TT, you need to tighten or loosen the nuts located at the corresponding lever or gear shift pedal: the leve…

Removing Clutch from Derbi D50B Engine Block

Remove the fairings and the fuel tank for optimal working conditions. Drain the coolant by opening the drain plug. Give the pedal a few taps to push out any remaining fluid. Unscrew the brake pedal pin, then drain the engine oil from its outlet hole. Remove the small cover from the mixer. Disconnect all services and the throttle cable. Remove the crankcase cover by unscrewing the screws. Remove the pedal and then the cover. Here is the clutch! Remove the clutch disc assembly by unscrewing the 5 screws with springs, then the plate and finally the discs themselves.

Watch the video!


by ScegliAuto

More videos