Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valves on the Moto Guzzi Nevada 750

Model: Moto Guzzi Nevada 750
Part: Checks and maintenance

Video tutorial

Today, in this brief and simple guide, you will learn the steps to adjust the valve clearance on the Moto Guzzi Nevada 750. First, place your motorcycle on a stand and begin by removing the cylinder head cover; to do this, disconnect the spark plug electrical connector and remove the spark plug, then unscrew the cover bolts.

At this point, obtain a feeler gauge and a spanner to adjust your valves, referring to the values in the owner's manual; manually rotate the stator to perform the adjustment, following the video tutorial until the end!


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Set the Clock on a Moto Guzzi Nevada 750?
How to Set the Clock on a Moto Guzzi Nevada 750?
Nevada 750 You can adjust the clock on a Moto Guzzi Nevada 750 by holding down the TRIP button located at the bottom centre of the instrument panel after it has…
How do you replace the air filter of the Moto Guzzi Nevada 750?
How do you replace the air filter of the Moto Guzzi Nevada 750?
Nevada 750 In order to replace the air filter of the Moto Guzzi Nevada 750, you need to loosen the screws that secure the fuel tank to its housing at the front …
How to Change the Final Drive Oil of a Moto Guzzi Nevada 750?
How to Change the Final Drive Oil of a Moto Guzzi Nevada 750?
Nevada 750 To replace the final drive oil of your Moto Guzzi Nevada 750, first ensure that the engine is cold. Next, lift the bike onto a stand to make the job …

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos