Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the MV Agusta Brutale 800?

Model: Mvagusta Brutale 800
Part: Battery

Video tutorial

It will be possible to replace the battery on the MV Agusta Brutale 800 by loosening the bolts that secure the seat to its housing, so that the seat can be completely removed. After removing the seat, it will be possible to unscrew the screws that fix the plastic side panels of the motorcycle, located just below the fuel tank.

Once these have also been removed, it will be possible to lift the tank and extract the battery underneath after disconnecting the connectors. In this way, it will be possible to insert the new battery and reassemble all the removed components.


Posted on 11 May 2025 by ScegliAuto


Related tutorials

How to Replace the Battery on a MV Agusta Brutale 800?
Brutale 800 To replace the battery on a MV Agusta Brutale 800, unscrew the bolts securing the seat and those fixing the side panels located just below the fuel t…
How do you replace the battery of the MV Agusta Brutale 800?
How do you replace the battery of the MV Agusta Brutale 800?
Brutale 800 To replace the battery of the MV Agusta Brutale 800, you will need to loosen the screws that secure the motorcycle seat to its housing: once the seat…
How to Replace the Exhaust on the MV Agusta Brutale 800?
How to Replace the Exhaust on the MV Agusta Brutale 800?
Brutale 800 To replace the exhaust on the MV Agusta Brutale 800, loosen the bolts securing it to the end of the exhaust pipe on the right side of the bike. Once …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos