Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Adjustment on MV Agusta F3 800

Model: Mvagusta F3 800
Part: Battery

Video tutorial

The battery is located under the fuel tank, but instead of removing it, remove the side fairing which is less complicated. Once done, locate the starter relay which has two wires, one marked with a B going to the battery and one with an M, indicating the starter motor.

Connect your starter with the positive terminal to connector B and the negative terminal to the chassis to complete the circuit. Turn on the ignition and then the engine.

Disconnect everything and refit the fairing. To preserve the battery, disconnect it by unplugging the connector.

This will ensure that, even during the winter break, the battery does not discharge.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Indicator Bulb on a MV Agusta F3 800?
How to Replace the Front Indicator Bulb on a MV Agusta F3 800?
F3 800 To replace the front indicator bulb on a MV Agusta F3 800, extract the bulb from its housing located at the central lower part of the bike's nose. On…
How to Adjust the Chain on MV Agusta F3 800
How to Adjust the Chain on MV Agusta F3 800
F3 800 In this brief guide, learn how to correctly adjust the tension of the transmission chain on the 2017 MV Agusta F3 800. First, place the bike on its s…
How to Replace the Rear Shock Absorber of the MV Agusta F3 800?
How to Replace the Rear Shock Absorber of the MV Agusta F3 800?
F3 800 To replace the rear shock absorber of the MV Agusta F3 800, you need to loosen the bolts that secure it to its housing: these bolts will be located a…

How to Adjust the Time on a Triumph Street Triple 1200 RS?

In this tutorial, you will see how to adjust the time on a Triumph Street Triple 1200 RS, a very simple and quick operation to perform, for example, after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the dashboard and navigate to the general menu on the display using the directional buttons on the left-hand dial. Next, enter "Date & Time", adjust both the clock and the date as needed, and save the setting by returning to the main screen.

Watch the video!


by ScegliAuto

More videos