Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Mvagusta F4 1078rr
Part:

In this guide, you will learn how to remove the fuel tank from an Mv Agusta F4. First, remove the rider's seat by taking out the fixing screws and disconnecting the electrical connector underneath; then unscrew the screws of the tank located just below the seat, as well as the side screws, removing the plastics. At this point, remove the tank and disconnect the fuel line and the electrical connector for the fuel level indicator. Once removed, you can reassemble it by applying the reverse procedure!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on the MV Agusta F4 1078RR
How to Replace the Fuel Pump on the MV Agusta F4 1078RR
F4 1078rr To replace the fuel pump on the MV Agusta F4 1078RR, loosen the bolts securing the fuel tank to its housing so that it can be removed. These bolts ar…
Replacing the Battery on an MV Agusta F4
Replacing the Battery on an MV Agusta F4
F4 1078rr In this video tutorial, you will learn how to remove and replace the battery of an MV Agusta F4. First, remove the seat and disconnect the electrical…
How to Replace the Air Filter on an MV Agusta F4 1078 RR
How to Replace the Air Filter on an MV Agusta F4 1078 RR
F4 1078rr This guide briefly outlines the main steps to disassemble and replace the engine air filter on the MV Agusta F4 RR motorcycle. First, place your moto…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos