Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Mv Agusta Brutale 800

Model: Mvagusta Brutale 800
Part: Antifreeze coolant

Video tutorial

In this tutorial, you will learn how to replace the coolant in the Mv Agusta Brutale 800 motorcycle. First, remove the screws from the plastic fairing located at the top left, then unscrew the radiator cap. Next, move down to the right side of the engine and unscrew the coolant drain screw, as shown in the video.

Once the coolant has drained, top up by pouring the appropriate fluid for your radiator type; fill it to the maximum level, topping up the fluid later if necessary!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
Brutale 800 This guide explains how to disassemble and replace the coolant reservoir on an MV Agusta Brutale 800. First, place your bike on a stand and begin by …
How to top up the coolant of the MV Agusta Brutale 800.
How to top up the coolant of the MV Agusta Brutale 800.
Brutale 800 In this guide, we will go over the instructions that will allow us to top up the engine coolant of the MV Agusta Brutale 800. First, let's place the …
How to Replace the Exhaust on the MV Agusta Brutale 800?
How to Replace the Exhaust on the MV Agusta Brutale 800?
Brutale 800 To replace the exhaust on the MV Agusta Brutale 800, remove the plastic panel located on the right side of the bike, just in front of the exhaust. Un…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos