Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the coolant of the MV Agusta Brutale 800.

Model: Mvagusta Brutale 800
Part: Antifreeze coolant

Video tutorial

In this guide, we will go over the instructions that will allow us to top up the engine coolant of the MV Agusta Brutale 800. First, let's place the motorcycle on a stand and start by removing the plastic cover located on the right side, behind the headlight.

Then, unscrew the cap of the coolant reservoir and proceed to top it up with the new fluid (of the same type, filling it up to the maximum level mark), as shown in the video.

At this point, screw the cap back on and start the engine, topping up again if necessary.


Posted on 2 January 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in the Mv Agusta Brutale 800
How to Replace the Coolant in the Mv Agusta Brutale 800
Brutale 800 In this tutorial, you will learn how to replace the coolant in the Mv Agusta Brutale 800 motorcycle. First, remove the screws from the plastic fairin…
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
Brutale 800 This guide explains how to disassemble and replace the coolant reservoir on an MV Agusta Brutale 800. First, place your bike on a stand and begin by …
How to Change the Engine Oil of the MV Agusta Brutale 800?
How to Change the Engine Oil of the MV Agusta Brutale 800?
Brutale 800 To change the engine oil of the MV Agusta Brutale 800, loosen the drain plug located at the bottom centre of the vehicle's oil sump. Once the plug is…

How to Reset the Service Light on a KTM Super Duke 1290 R

This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance. Start by inserting the key and turning on the instrument panel, then navigate to the general menu, move the selector to "Options" and press the two indicated buttons. Adjust the two intervals using the directional arrows, return to the main screen, and restart the panel to verify that the reset was successful.

Watch the video!


by ScegliAuto

More videos