Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief guide, we will see the instructions for removing and replacing the headlamp lens on the MV Agusta Brutale 1098 R motorcycle. First, place the motorcycle on its stand and start by removing the front headlamp; to do this, unscrew its fixing screws and disconnect the bulb electrical connector. At this point, use a thin plastic lever to remove the headlamp lens, then replace it with the new one; secure it properly to the optical unit before refitting it to the motorcycle, following the video tutorial to the end!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a MV Agusta Brutale 1090?
How to Replace the Battery on a MV Agusta Brutale 1090?
Brutale 1090rr To replace the battery on a MV Agusta Brutale 1090, pry up the lower part of the seat so that it can be detached to access the components underneath.…
How to replace the brake oil on the MV Agusta Brutale 1090RR
Brutale 1090rr The steps illustrated in this guide will show us how to bleed and top up the brake fluid or oil of the MV Agusta Brutale 1090RR motorcycle. First, we…
How to Replace the Fuel Tank on a MV Agusta Brutale 1090RR?
How to Replace the Fuel Tank on a MV Agusta Brutale 1090RR?
Brutale 1090rr To replace the fuel tank on a MV Agusta Brutale 1090RR, first remove the motorcycle seat to access the screw that secures the tank at its front, prev…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos