Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Polish the Exhaust of the MV Agusta Brutale R 910 F4

Model: Mvagusta Brutale R910
Part: Exhaust muffler

Video tutorial

This guide shows how to dismantle and polish the exhaust system, particularly the headers, of the MV Agusta Brutale R 910 F4. First, place your bike on a stand and start unscrewing the fixing screws of the exhaust silencer to remove it; then unscrew the nuts of the headers attached to the exhaust, as shown in the video.

Once the headers are removed, polish them using very fine sandpaper soaked in water; perform the final polish with appropriate products to complete the job!


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the MV Agusta Brutale 910
How to Change the Engine Oil and Oil Filter of the MV Agusta Brutale 910
Brutale R910 In this guide, you will learn how to carry out routine maintenance by replacing the engine oil and oil filter of the MV Agusta Brutale 910. First, pl…
Top Up Brake or Clutch Fluid on MV Agusta Brutale 910
Top Up Brake or Clutch Fluid on MV Agusta Brutale 910
Brutale R910 In this video, you will see how to top up the brake fluid on an MV Agusta Brutale 910, as well as on the 750 and 1000. To top up the brake or clutch …
Battery Replacement on Mv Agusta Brutale 910
Battery Replacement on Mv Agusta Brutale 910
Brutale R910 In this video, you will see how to remove and replace the battery of an Mv Agusta Brutale 910. First, open and remove the rear seat; then, remove the…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos