Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the rear sprocket on the MV Agusta F4 1000R, loosen the nut that secures the rear wheel to the axle at the end of the swingarm. Once this nut is loosened, you can remove the support that holds the brake disc and the sprocket, also moving the chain. Then, extract and replace the bearing and the corresponding wheel locking pin with new replacement parts. After replacement, fit the new sprocket, positioning the chain around it. Finally, reassemble all other removed components.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator on a MV Agusta F4 1000R?
How to Replace the Radiator on a MV Agusta F4 1000R?
F4 1000r To replace the radiator on a MV Agusta F4 1000R, first loosen the screws that secure the front side panels of the bike, allowing them to be removed f…
How to replace the exhaust on the MV Agusta F4 1000R?
How to replace the exhaust on the MV Agusta F4 1000R?
F4 1000r You can replace the exhaust on the MV Agusta F4 1000R by loosening the screws that secure it to the respective supports at the rear mudguard. Once th…
How to Replace the Exhaust of the MV Agusta F4 1000R?
How to Replace the Exhaust of the MV Agusta F4 1000R?
F4 1000r To replace the exhaust of the MV Agusta F4 1000R, loosen the screws securing the exhaust at the rear, where it connects to the rear mudguard. Once th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos