Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the fuel pump on the MV Agusta F4 1000S, first loosen the bolts securing the seat to its mount so that it can be completely removed. After removing the seat, proceed to loosen the screws securing the fuel tank at the front of the bike. The tank can then be removed from its mount by disconnecting the hoses and connectors; the pump inside can then be extracted and replaced with a new one, reassembling all previously removed components.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads on a MV Agusta F4 1000S?
How to replace the front brake pads on a MV Agusta F4 1000S?
F4 1000r To replace the front brake pads on a MV Agusta F4 1000S, loosen the screws securing the brake caliper to its disc. This will allow you to detach the …
How to Replace the Oil Feed Pipe on the MV Agusta F4 1000R?
How to Replace the Oil Feed Pipe on the MV Agusta F4 1000R?
F4 1000r To replace the oil feed pipe on the MV Agusta F4 1000R, open the oil drain plug located at the lower central part of the bike. By opening this plug, …
How to Replace the Radiator on a MV Agusta F4 1000R?
How to Replace the Radiator on a MV Agusta F4 1000R?
F4 1000r To replace the radiator on a MV Agusta F4 1000R, first loosen the screws that secure the front side panels of the bike, allowing them to be removed f…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos