Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the instructions for installing the radiator grille on the Mv Agusta Brutale 800 motorcycle, as well as the Dragster. First, place the motorcycle on a stand and begin positioning the radiator grille onto the radiator; then secure it on the sides by installing all the screws provided in the grille kit, as shown in the video. The radiator grille must not obstruct any other components, particularly the forks; also, ensure that the grille is the correct type and does not interfere with the proper functioning of the radiator.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the radiator grille of the MV Agusta Brutale 800
How to install the radiator grille of the MV Agusta Brutale 800
Brutale 800 Today we will see the instructions that will allow us to install the radiator grille of the MV Agusta Brutale 800, in simple and quick steps. First, …
How to Replace the Coolant in the Mv Agusta Brutale 800
How to Replace the Coolant in the Mv Agusta Brutale 800
Brutale 800 In this tutorial, you will learn how to replace the coolant in the Mv Agusta Brutale 800 motorcycle. First, remove the screws from the plastic fairin…
How to Replace the Front Bulb on an MV Agusta Brutale 800
How to Replace the Front Bulb on an MV Agusta Brutale 800
Brutale 800 In today's video, learn how to install a new LED front light on the MV Agusta Brutale 800. First, ensure the engine is cold to avoid burns. Next, rem…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos