Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Pathfinder
    4. : Headlight

Nissan Pathfinder - Headlight

Headlight Nissan Pathfinder (2005-2012 / mk 3, r 51)

Nissan Pathfinder (2005-2012 / MK 3, R51)
How to Change the Front Headlight on a Nissan Pathfinder
To replace the front headlight on a Nissan Pathfinder, open the bonnet and start by removing the front grille, which is secured with clips or screws at the …Read all…
Posted on 25 March 2026 by ScegliAuto
Nissan Pathfinder (2005-2012 / MK 3, R51)
How to Remove the Front Headlight in the Nissan Pathfinder?
As seen in this tutorial, removing the front headlights in the Nissan Pathfinder is an extremely simple operation. First, remove the front grille by unlocking …Read all…
Posted on 25 July 2026 by ScegliAuto
Airbag (1) Antenna (1) Car stereo (4) Anti-roll bar (1) Control arm (1) Key (6) A/C controls (1) Checks and maintenance (2) Bearing (1) Differential (1) Headlight (2) Tail light (1) Fog lights (1) Cabin air filter (4) Clutch (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) Starter motor (1) Brake fluid (1) Engine oil (1) Clock (2) Door trim panel (4) Brake pads (5) Hydraulic pistons (1) Pump (1) Push button (1) Instrument cluster (1) Fuse box (14) Door lock (1) Suspension system (1) Warning light – error code (4) (1) Service warning light (19) Brake drums and shoes (2) Thermostat (1) Center console tunnel (1) Valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos