Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Pathfinder
    4. : How to remove the headlight in the Nissan Pathfinder?

Nissan Pathfinder - Video tutorial

Model: Nissan Pathfinder R51, MK 3 - Years 2005-2012
Part: Headlight
Operation: How to remove the headlight in the Nissan Pathfinder?

As we can see in this tutorial, removing the headlights in the Nissan Pathfinder is an extremely simple operation. First of all, we disassemble the front grille by releasing the relative pins placed laterally and on the upper edge, then, with a 10mm wrench, we unscrew the fixing bolts of the headlight, two placed on the upper edge, one in the inner edge and the last on the back. Once this is done, unscrew the bolts securing the wheel arch to the bumper, grab the headlight, shake it slightly and extract it from the body, finally disconnecting the power connector.


Posted on 28 May 2024 by ScegliAuto



How to replace the battery in the Nissan Pathfinder key.
Nissan Pathfinder (2005-2012 / R51, MK 3) The procedure necessary to replace the battery of your Nissan Pathfinder Mk3 key is practically identical to that already used in other Nissan car mo
How to replace the Nissan Pathfinder headlight bulb
Nissan Pathfinder (1996-2004 / R50, MK 1) Unhook and lift the hood, then you will have to unhook the part of the bumper with the grille, you just need to unhook the three joints on its back,
How to reset the service in the Nissan Pathfinder?
Nissan Pathfinder (2005-2012 / R51, MK 3) In this tutorial we can see how to reset the service in the Nissan Pathfinder, an extremely simple and quick operation, to be carried out only once a

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos