Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Pathfinder
    4. : Control arm

Nissan Pathfinder - Control arm

Control Arm Nissan Pathfinder (1996-2004 / mk 1, r 50)

Nissan Pathfinder (1996-2004 / MK 1, R50)
Replacing the Wishbones
Remove the relevant wheel and then locate the position of the wishbones. Identify where they are secured and spray some lubricant or rust remover to make the …Read all…
Posted on 7 March 2026 by ScegliAuto
Airbag (1) Antenna (1) Car stereo (4) Anti-roll bar (1) Control arm (1) Key (6) A/C controls (1) Checks and maintenance (2) Bearing (1) Differential (1) Headlight (2) Tail light (1) Fog lights (1) Cabin air filter (4) Clutch (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) Starter motor (1) Brake fluid (1) Engine oil (1) Clock (2) Door trim panel (4) Brake pads (5) Hydraulic pistons (1) Pump (1) Push button (1) Instrument cluster (1) Fuse box (14) Door lock (1) Suspension system (1) Warning light – error code (4) Tire pressure warning light (1) Service warning light (19) Brake drums and shoes (2) Thermostat (1) Center console tunnel (1) Valve (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos