Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Pathfinder
    4. : Brake drums and shoes

Nissan Pathfinder - Brake drums and shoes

Brake Drums And Shoes Nissan Pathfinder (1986-1995 / mk 1, wd21)

Nissan Pathfinder (1986-1995 / MK 1, Wd21)
Installation of the Drum and Shoes. Part 2/2
Once the drum is removed, connect the lever attached to one shoe to the spring on the element behind the wheel fixing disc. Position the two shoes carefully, …Read all…
Posted on 2 March 2026 by ScegliAuto
Nissan Pathfinder (1986-1995 / MK 1, Wd21)
Replacing Rear Brake Shoes
To replace the rear brake shoes, loosen the wheel nuts before lifting the vehicle; then place the jack under the differential and position the car on suitable …Read all…
Posted on 25 February 2026 by ScegliAuto
Airbag (1) Antenna (1) Car stereo (4) Anti-roll bar (1) Control arm (1) Key (6) A/C controls (1) Checks and maintenance (2) Bearing (1) Differential (1) Headlight (2) Tail light (1) Fog lights (1) Cabin air filter (4) Clutch (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) Starter motor (1) Brake fluid (1) Engine oil (1) Clock (2) Door trim panel (4) Brake pads (5) Hydraulic pistons (1) Pump (1) Push button (1) Instrument cluster (1) Fuse box (14) Door lock (1) Suspension system (1) Warning light – error code (4) (1) Service warning light (19) Brake drums and shoes (2) Thermostat (1) Center console tunnel (1) Valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos