Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Tyre Pressure of the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

The tyre pressure of the Nissan Juke must be adjusted according to the parameters indicated by the manufacturer. These parameters are found on a label inside the driver's door.

Using a pressure gauge and an air compressor, adjust the pressure of each tyre following the instructions. Once completed, you can get into the vehicle to set the new tyre pressures.

This operation should be performed not only when the pressure warning light illuminates on the dashboard but also before undertaking long journeys.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Resetting the tyre pressure of the Nissan Juke
Resetting the tyre pressure of the Nissan Juke
Nissan Juke (2019-2026 / MK 2) When the load conditions of the Nissan Juke change, you must adjust the tyre pressure values accordingly: for reference, you will find a label on the…
How do you reset the tire pressure light on the Nissan Juke?
How do you reset the tire pressure light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In order to reset the tire pressure warning light of the Nissan Juke, you need to inflate the tires to the recommended pressure level. Once the tires…
How to reset the tyre pressure warning light on a Nissan Juke
How to reset the tyre pressure warning light on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) In this short video tutorial, learn how to reset the tyre warning light on a Nissan Juke, produced from 2010 to 2019. First, ensure the correct press…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos