Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this short video tutorial, learn how to reset the tyre warning light on a Nissan Juke, produced from 2010 to 2019. First, ensure the correct pressure of all four tyres. Once done, enter the vehicle and turn on the ignition without starting the engine.

You will still see the tyre warning light illuminated. To remove it, press and hold the appropriate button located under the steering wheel for more than five seconds.

Now, turn off the ignition and start the vehicle to check that the reset has been successful.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Nissan Juke?
How to reset the tyre pressure warning light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To reset the tyre pressure warning light on the Nissan Juke, turn on the ignition by inserting the key into the ignition barrel. Before starting the …
How to Adjust the Tyre Pressure of the Nissan Juke
How to Adjust the Tyre Pressure of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) The tyre pressure of the Nissan Juke must be adjusted according to the parameters indicated by the manufacturer. These parameters are found on a labe…
How to Reset the Tyre Pressure Warning Light on the Nissan Juke
How to Reset the Tyre Pressure Warning Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) The tyre pressure warning light on the dashboard indicates a potential loss of pressure or a puncture in one or more tyres. Here’s how to reset the T…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos