Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

The tyre pressure warning light on the dashboard indicates a potential loss of pressure or a puncture in one or more tyres. Here’s how to reset the TPMS light on the Nissan Juke. First, get into the vehicle and turn on the ignition.

Locate the reset button at the bottom left and hold it until the light on the dashboard resets, as shown in the video. At this point, turn off the ignition and start the engine, checking that the TPMS sensor has reset successfully!


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure light on a 2014 Nissan Juke?
How to reset the tyre pressure light on a 2014 Nissan Juke?
Nissan Juke (2010-2019 / MK 1) Inside the cabin of the 2014 Nissan Juke, on the right side next to the steering wheel, there is a button panel with some very useful functions. One …
How to Reset the Tyre Pressure Warning Light on a Nissan Juke?
How to Reset the Tyre Pressure Warning Light on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The tyre pressure warning light that appears on the instrument cluster of the Nissan Juke can be reset by inflating the tyres to the recommended pres…
How to reset the tyre warning light in the Nissan Juke?
How to reset the tyre warning light in the Nissan Juke?
Nissan Juke (2019-2026 / MK 2) In this tutorial, you will see how to reset the tyre warning light in the Nissan Juke, a very simple and quick operation to perform only after restor…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos