Do it yourself
Frequently asked questions about cars and motorcycles

How to permanently deactivate the start & stop function on a Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we see how to permanently disable the start & stop function on a Nissan Qashqai, and in general on all Nissan cars equipped with it. We open the hood and identify the start & stop sensor, which is located next to the engine block; the component is attached to the car chassis with a bracket, secured by a 10 screw; without disconnecting it, we place it in a position where it cannot be activated by pressure, and secure it to this housing with a cable tie, then we put back the 10 bolt, in case we need to reactivate the component.


Posted on 9 April 2025 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) Today we will explain how to permanently deactivate the Start&Stop system of the Nissan Qashqai model J11. To deactivate the system permanently, we n…
Nissan Qashqai (2014-2022 / J11) Today's guide will show you the steps to temporarily disable the Start&Stop system of the Nissan Qashqai. First, get in the vehicle and start the eng…
Nissan Qashqai (2014-2022 / J11) In this tutorial, we can see how to deactivate the Start & Stop function in the Nissan Qashqai, an extremely simple and quick operation to be carried…

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos