Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuse box of the Nissan Qashqai 2025 located?

Model: Nissan Qashqai J12 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

See other generations:
Video tutorial

In this new guide dedicated to all of you who own a 2025 Nissan Qashqai, we will explain how you can easily locate the box containing all the fuses of the vehicle. First of all, enter the passenger compartment and make sure the car is turned off, then proceed with opening the glove compartment and then remove the small protective cover located on the side of the compartment.

Once you have completely removed the cover in question, you will have in front of you all the fuses you were looking for, so the procedure is successfully completed.


Posted on 10 August 2025 by ScegliAuto


Related tutorials

Nissan Qashqai (2021-2026 / J12) The internal fuse box of the Nissan Qashqai is located inside the cabin and is very easy to access. To find it, open the driver's side door and look …
Nissan Qashqai (2014-2022 / J11) In this video, we can see where the fuse boxes are located in the Nissan Qashqai and their respective diagrams, useful if we need to check the fuses …
Nissan Qashqai (2006-2014 / J10) The Nissan Qashqai J10 has two fuse boxes. The first is located in the dashboard, at the bottom left of the steering wheel, accessible after removing…

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the windshield washer pump fuse located in the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai horn fuse located? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos