Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light of the Nissan Cube?

Model: Nissan Cube Z12 - Years 2008-2013
Part: Service warning light

It will be possible to make the Service light of the Nissan Cube disappear by holding down the TRIP button located in the lower center of the instrument panel: by continuing to hold down this button, it will be possible to insert the ignition key into the ignition switch and turn it to start the instrument panel. By doing this, you will be able to wait for the Service light to stop flashing until it turns off completely: once the procedure is complete, you can turn off the instrument panel and remove the ignition key from the corresponding switch.

Posted on 7 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Nissan Cube (2008-2013 / Z12) This guide shows how to lower the rear seats of the Nissan Cube, following the instructions below. First, open the tailgate and the rear doors; then …
Nissan Cube (2008-2013 / Z12) In the Nissan Cube there are three fuse boxes: the main one is located inside the hood, on the top right near the windshield, in a black plastic box …
Nissan Cube (2008-2013 / Z12) Open the front bonnet and look to the right. At the top of the engine bay, right next to the battery, you can locate the first fuse box. Moving to th…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos