Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. : Cube

Nissan Cube - Videoguide

Nissan Cube (2008-2013 / Z12)
Where are the fuses of the Nissan Cube?
We open the front hood and look to the right. In the upper part of the engine compartment, right next to the battery, we can identify the first fuse box. …read all…
Posted on 28 May 2023 by ScegliAuto
Nissan Cube (2008-2013 / Z12)
How to replace the front headlight bulb on the Nissan Cube.
If we need to replace a headlight bulb on this car model, in the following description we will find all the necessary information and instructions for a …read all…
Posted on 20 May 2023 by ScegliAuto
Nissan Cube (2008-2013 / Z12)
How to fold down the rear seats of your Nissan Cube
Let's see in this guide how to fold down the rear seats of your Nissan Cube, following the instructions below. First we open the tailgate of the trunk and the …read all…
Posted on 12 May 2023 by ScegliAuto
Nissan Cube (2008-2013 / Z12)
Replacing the cabin air filter
Changing the cabin air filter of your car is possible, just follow the simple steps indicated in the guide. By doing so you will be able to periodically …read all…
Posted on 12 September 2023 by ScegliAuto
Nissan Cube (2008-2013 / Z12)
Cabin air filter replacement
The passenger compartment air filter is located on the passenger side, behind the glovebox: to be able to replace it, the drawer itself must therefore be …read all…
Posted on 23 July 2023 by ScegliAuto
Cabin air filter (2) Headlight bulb (1) Fuse box (1) Seat (1)

See also:

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos