Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Lower the Rear Seats of the Nissan Cube

Model: Nissan Cube Z12 - Years 2008-2013
Part: Seat

This guide shows how to lower the rear seats of the Nissan Cube, following the instructions below. First, open the tailgate and the rear doors; then lower the seatbelt attachments by pulling the straps down to lower the backrests of the rear seats, as shown in the video. This will significantly increase the load capacity inside the vehicle; the modularity of the seats allows you to lower only the right seat, just the two seats, or both!

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Nissan Cube?
How do you reset the Service light of the Nissan Cube?
Nissan Cube (2008-2013 / Z12) It will be possible to make the Service light of the Nissan Cube disappear by holding down the TRIP button located in the lower center of the instrum…
Localization and diagram of the fuse boxes of the Nissan Cube.
Localization and diagram of the fuse boxes of the Nissan Cube.
Nissan Cube (2008-2013 / Z12) In the Nissan Cube there are three fuse boxes: the main one is located inside the hood, on the top right near the windshield, in a black plastic box …
Where are the fuses of the Nissan Cube?
Where are the fuses of the Nissan Cube?
Nissan Cube (2008-2013 / Z12) Open the front bonnet and look to the right. At the top of the engine bay, right next to the battery, you can locate the first fuse box. Moving to th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos