Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Nissan Cube

Model: Nissan Cube Z12 - Years 2008-2013
Part: Headlight bulb

If you need to replace a front headlamp bulb on this car model, the following description provides all the necessary information and instructions for a correct replacement. First, locate the headlamp unit containing the burnt bulb and reach behind it to remove the cover. Underneath, you will find the electrical connector that you need to disconnect, then remove the steel clip securing the bulb and take it out. Take the new bulb and reposition it in the headlamp, then reattach the steel clip, reconnect the electrical connector, and close the plastic cover.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Lower the Rear Seats of the Nissan Cube
How to Lower the Rear Seats of the Nissan Cube
Nissan Cube (2008-2013 / Z12) This guide shows how to lower the rear seats of the Nissan Cube, following the instructions below. First, open the tailgate and the rear doors; then …
How do you reset the Service light of the Nissan Cube?
How do you reset the Service light of the Nissan Cube?
Nissan Cube (2008-2013 / Z12) It will be possible to make the Service light of the Nissan Cube disappear by holding down the TRIP button located in the lower center of the instrum…
Localization and diagram of the fuse boxes of the Nissan Cube.
Localization and diagram of the fuse boxes of the Nissan Cube.
Nissan Cube (2008-2013 / Z12) In the Nissan Cube there are three fuse boxes: the main one is located inside the hood, on the top right near the windshield, in a black plastic box …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos