Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light of the Nissan Pulsar?

Model: Nissan Pulsar MK 1 - Years: 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

It will be possible to completely reset the tire pressure warning light of the Nissan Pulsar by inflating the tires until they are brought back to the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar.

Once the inflation has been done, you can proceed by turning on the instrument panel and moving within its menu using the arrow buttons on the steering wheel's side spoke: when the tire-related item appears, you will need to hold down the OK button to make the warning light disappear.


Posted on 7 November 2025 by ScegliAuto


Related tutorials

How to reset the tyre pressure light on a Nissan Pulsar?
How to reset the tyre pressure light on a Nissan Pulsar?
Nissan Pulsar (2014-2018 / MK 1) To reset the tyre pressure light on a Nissan Pulsar, inflate the tyres until they reach the recommended pressure value: this value is indicated on th…
How do you reset the Service light on the Nissan Pulsar?
How do you reset the Service light on the Nissan Pulsar?
Nissan Pulsar (2014-2018 / MK 1) You can completely remove the Service indicator that is shown on the instrument panel of the Nissan Pulsar by inserting the ignition key into the ign…
How to reset the tyre warning light on a Nissan Pulsar?
How to reset the tyre warning light on a Nissan Pulsar?
Nissan Pulsar (2014-2018 / MK 1) To reset the tyre warning light on a Nissan Pulsar, turn on the ignition without starting the engine and use the buttons on the steering wheel to nav…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos