Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan in the Nissan Altima?

Model: Nissan Altima L33 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

In this tutorial, we can see how to replace the cabin fan in the Nissan Altima, an extremely simple and quick operation. First, let's make sure the key is not inserted, then we position ourselves on the passenger side, open the glove compartment, remove the right dashboard cover, and unscrew all the indicated screws.

Next, we separate the drawer from the support, disconnect the fan connector, and disassemble the fan by unscrewing the relevant screws. At this point, all that's left is to insert the replacement and reassemble everything by following the reverse procedure.


Posted on 17 January 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the 2017 Nissan Altima
How to replace the engine air filter of the 2017 Nissan Altima
Nissan Altima (2013-2018 / L33) To correctly replace the engine air filter in your 2017 Nissan Altima, simply follow the steps described in our new guide. Fortunately, this is a rat…
Where is the radiator fan fuse located in the Nissan Altima?
Nissan Altima (1998-2001 / L30) If the radiator fan in your Nissan Altima suddenly stops working, the first thing to do is check the status of the respective fuse, which is shown in…
How to Replace the Cabin Air Filter in the Nissan Altima?
How to Replace the Cabin Air Filter in the Nissan Altima?
Nissan Altima (2013-2018 / L33) To replace the cabin air filter in the Nissan Altima, detach the side cover of the footwell, near the center console. Once this panel is removed, acc…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos