Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Nissan Altima key remote control

Model: Nissan Altima L32 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Key

See other generations:
Video tutorial

Today's information will allow us to change the battery of the key remote for the Nissan Altima, in simple and quick steps. First, we take our remote and begin by removing the physical key from inside it; then we leverage the slot created to open the remote in two parts, accessing the electronic board and the battery, as shown in the video.

At this point, we remove the battery and replace it with a new one of the correct type (in this case a CR 2032 3V); finally, we verify the functioning of the controls.


Posted on 2 September 2025 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery in a Nissan Altima
How to Replace the Key Fob Battery in a Nissan Altima
Nissan Altima (2002-2006 / L31) This tutorial shows how to replace the key fob battery in a Nissan Altima, a very simple and inexpensive task. To do this, you will need a small flat…
How to replace the remote control battery in the Nissan Altima?
How to replace the remote control battery in the Nissan Altima?
Nissan Altima (2013-2018 / L33) In this tutorial we can see how to replace the battery of the Nissan Altima remote control, an extremely simple and quick operation. To do this we wi…
How to Replace the Key Fob Battery on a Nissan Altima?
How to Replace the Key Fob Battery on a Nissan Altima?
Nissan Altima (2002-2006 / L31) Replacing the key fob battery on a Nissan Altima, as shown in this tutorial, is an extremely simple and quick operation. For this, you will need a sm…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos