Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Altima
    4. : How to replace the battery of the Nissan Altima remote control?

Nissan Altima - Video tutorial

Model: Nissan Altima L31 - Years 2002-2006
Part: Key
Operation: How to replace the battery of the Nissan Altima remote control?

In this tutorial we can see how to replace the battery of the Nissan Altima remote control, an extremely simple and inexpensive operation. To do this, we will need a small flat-tipped screwdriver and a replacement battery of type CR2025. First of all, we locate the slot on the lower edge, then insert the screwdriver inside and, levering, unlock the two halves of the remote control. Once fully opened, we proceed with the replacement of the battery, being careful to position the replacement with the negative pole facing upwards. Finally, we reassemble everything.


Posted on 31 May 2023 by ScegliAuto



How to replace the battery of the Nissan Altima remote control?
Nissan Altima (2002-2006 / L31) Replacing the battery of the Nissan Altima remote control, as we can see in this tutorial, is an extremely simple and quick operation. To do this, we
How to replace the remote control battery of Nissan Altima?
Nissan Altima (2018-2023 / L34) In this tutorial we can see how to replace the Nissan Altima remote control battery, a very simple and fast operation. To do this, we will need a sma
How to replace the remote control battery of Nissan Altima?
Nissan Altima (2007-2012 / L32) Replacing the remote control battery of the Nissan Altima is very simple, let's see how to proceed in this tutorial. For this operation we will need,

    Frequently Asked Questions

    • Altima 2018-2023 - What is the problem with the electronic key of the Nissan Altima? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos