Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Fluid Levels on the Nissan Cabstar

Model: Nissan Cabstar MK 3 - Years 2007-2013
Part: Checks and maintenance

Today, you will discover the instructions that will allow you to check the fluid levels of the Nissan Cabstar engine in simple and quick steps. First, open the cab using the lever locking system found behind it; once unlocked, you will be able to access the top of the engine, as shown in the video. At this point, check the levels of the engine oil, brake fluid, and coolant, topping up if necessary; once finished, close and secure the cab properly.

Posted on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Nissan CABStar
Nissan Cabstar (2007-2013 / MK 3) In today's video tutorial, we will see the main steps to carry out routine maintenance by replacing the engine oil and oil filter on the Nissan CABSt…
How do you perform a reset on the Nissan Cabstar?
How do you perform a reset on the Nissan Cabstar?
Nissan Cabstar (2007-2013 / MK 3) In the Nissan Cabstar, just like in the Nissan Pathfinder, as mentioned in the video guide available here, there are common resets, for example, here…
How to Reset the "Service" Light on a Nissan CABStar
How to Reset the "Service" Light on a Nissan CABStar
Nissan Cabstar (2007-2013 / MK 3) Before you can start, sit in the driver's seat of your Nissan CABStar. Activate the instrument cluster by turning the key in the ignition. Then, pres…

Other guides you may be interested in

    Frequently Asked Questions

    • Cabstar 2007-2013 - Where is the Nissan Cabstar brake fluid pan located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos