Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : How to remove the door panel on Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Door panel
Operation: How to remove the door panel on Qashqai

Let's see how to remove the cover panel of a Qashqai. To disassemble the cover panel we need to disassemble some plastic covers. We disconnect the battery terminals in the engine compartment, remove the plastic in the space of the upper lever of the door opening and the screws in the handle (after removing the plastic cover). We remove the plastic covering near the lock, unscrew the screws left on the door panel and remove the clips fastening it. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We mount the new panel or the one previously removed.


Posted on 29 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos