Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Want to remove the covering panel of a Nissan Qashqai? Here’s how to disassemble the covering panel. Open the door and locate the securing screws inside the covering panel.

Remove the window switch from the covering plastics. Once all securing screws are removed, use a lever to detach all the plastic clips that hold the door.

Pull off the door panel by hand, disconnect any power connectors and release cables. Work inside the door once the cover is removed or replace the panel.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Nissan Qashqai
How to Remove the Door Panel of a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) How do you remove the door panel with the speaker on a Nissan Qashqai? This guide illustrates the procedure. Before starting the disassembly, disconn…
Where is the OBD port of the Nissan Qashqai J11?
Nissan Qashqai (2014-2022 / J11) Below, discover where the OBD port of your Nissan Qashqai J11 (2014-2022) is located. This port allows you to connect any compatible diagnostic tool …
How to Remove the Door Panel on a Nissan Qashqai
How to Remove the Door Panel on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) How do you remove the door panel on a Nissan Qashqai? This video explains the procedure. Before starting the disassembly, disconnect the battery term…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos