Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to remove the door panel of a Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Door panel
Operation: How to remove the door panel of a Nissan Qashqai

How to remove the door panel with attached speaker on a Nissan Qashqai? This video demonstrates how to proceed. Before starting the disassembly work, let's disconnect the battery terminals located in the front engine compartment. With a spatula or screwdriver we go to lever the handle on the door panel, remove the glossy black plastic molding on the door, then remove the handle with the relative buttons and disconnect the power supply cables. With a screwdriver we unscrew any screws on the lower handle, with the plastic spatula we unhook the window lifter buttons. We unscrew the remaining screws on the door panel, lever around the entire perimeter of the door panel. Finally we pull off the panel with our hands.


Posted on 5 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos