Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

How to remove the door panel of a Nissan Qashqai? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the front engine compartment.

Use a lever to pry the handle on the door panel; detach the black plastic trim, then remove the handle with the associated buttons and disconnect the power cables. Using a screwdriver, unscrew any screws present on the lower handle, and with a plastic spatula, release the window switch buttons.

Unscrew the remaining fastening screws on the door panel, and pry around the entire perimeter of the door panel. Finally, pull the panel off with your hands.

Fit the new panel.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to remove the front door panel of the Nissan Qashqai
How to remove the front door panel of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Following these simple steps, we will see how to disassemble and replace the front door panel of the Nissan Qashqai. First, open the front door of th…
How to Remove the Door Panel on Nissan Qashqai
How to Remove the Door Panel on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Want to remove the covering panel of a Nissan Qashqai? Here’s how to disassemble the covering panel. Open the door and locate the securing screws ins…
Removing the Front Door Panel on the Nissan Qashqai 2018
Removing the Front Door Panel on the Nissan Qashqai 2018
Nissan Qashqai (2014-2022 / J11) Let’s look at removing the door panel of the Nissan Qashqai. Remove the cover panel if damaged or if you need to work inside the door. Remove the tri…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos