Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb

Replacing the dipped beam bulb on a Nissan Qashqai is really simple, yet there is a hitch on one side. The video shows that on the right side there are no obstacles for the bulb: this means you simply need to unscrew the round cover at the back, disconnect the bulb, and pull it out of its socket to insert the new one. However, on the left side, to access the bulb, you first need to remove the air duct in that area by unscrewing the two bolts that secure it. For the rest, proceed as you would for the other headlight. Good luck and see you next time!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on the Nissan Qashqai J11
Replacing the Starter Motor on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, you will see the procedure necessary for removing and replacing the starter motor on the Nissan Qashqai J11, second series. First, ope…
Replacing the Cabin Air Filter on the Nissan Qashqai J11
Replacing the Cabin Air Filter on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) This guide explains the procedure to remove and replace the cabin air filter on the Nissan Qashqai J11, second series, in simple steps. First, get in…
Replacement of the front headlight bulbs of the Nissan Qashqai J11
Replacement of the front headlight bulbs of the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) To replace the headlights of the Nissan Qashqai, open the hood, disconnect the connector of the H11 low beam bulb, rotate it a quarter turn and remov…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos