Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Nissan Qashqai J11

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Starter motor

In this video, you will see the procedure necessary for removing and replacing the starter motor on the Nissan Qashqai J11, second series. First, open the bonnet and start by disconnecting the negative terminal of the battery; then remove the fuel pipes located at the top. Next, drain the coolant by disconnecting the radiator hose; now unscrew the bolts of the starter motor using a socket spanner. Follow the video until the end for reassembly!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Nissan Qashqai J11
How to replace the gear knob of the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) The steps to follow to complete the replacement of the gear knob of your Nissan Qashqai J11 are really very simple and you just need to read the foll…
Where is the OBD port of the Nissan Qashqai J11?
Nissan Qashqai (2014-2022 / J11) Below, discover where the OBD port of your Nissan Qashqai J11 (2014-2022) is located. This port allows you to connect any compatible diagnostic tool …
How to Replace the Air Filter on the Nissan Qashqai J11
How to Replace the Air Filter on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this guide for all Nissan Qashqai J11 owners (2014-2022), you will discover where the engine air filter is located and how to replace it safely an…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the starter motor on the Nissan Qashqai located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos