Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Nissan Juke?

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Warning light – error code

Resetting the oil service on a Nissan Juke is very simple; let’s see how to proceed in this tutorial. Of course, this operation should only be performed after changing the oil and the corresponding filter, as specified in the manual. To reset the service, all you need to do is turn on the instrument cluster, wait for it to initialise, and press and hold the two buttons located just below the display. Release the pressure after about 5 seconds when you see the message "oil good". Finally, turn off and then turn on the instrument cluster again to complete the procedure.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Nissan Juke?
How to reset the service in the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this tutorial, we can see how to reset the service in the Nissan Juke, an extremely simple and quick operation to be performed only after completi…
How do you reset the Service light on the Nissan Juke?
How do you reset the Service light on the Nissan Juke?
Nissan Juke (2019-2026 / MK 2) The Service light that appears on the Nissan Juke instrument panel can be reset by turning on the instrument panel and then moving within the menu us…
How to Reset the Service Light on a Nissan Juke?
How to Reset the Service Light on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To reset the Service light on a Nissan Juke, turn on the instrument panel and navigate through the menu that appears using the directional controls o…

    Frequently Asked Questions

    • Juke 2010-2019 - Why did the P / S light come on in the Nissan Juke? Read answer
    • Juke 2010-2019 - What does the red engine light on the Nissan Juke mean? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos